Home / Manufacturing / Production capabilities
Production capabilities
What happens on our floor between an approved idea and a packed carton: development and sampling, cutting, branding, finishing, quality control and export packing, organised as one system for all eight ranges.
Production flow
Ten steps, each with a sign-off.
Every order follows the same sequence. Each step has a defined output, so problems are caught where they start rather than at final inspection.
- Concept
- Tech pack
- Sampling
- Material sourcing
- Cutting
- Printing & embroidery
- Stitching
- Finishing
- Quality control
- Packing & shipping
Development & sampling
Product development & sampling
Your idea, reference or design file is turned into a specification the factory can follow: measurements, construction, materials, trims and branding positions. Samples then prove it on a real garment.
- Proto sample: the concept and construction
- Fit sample: size, balance and movement
- Size set: grading across your size run
- Pre-production sample: the signed-off standard for bulk
Tech pack support No tech pack yet? We build one from your sketch, photos or a reference garment, and it is yours to keep.
Cutting
Accuracy starts at the cutting table.
Cutting errors carry into every later stage: fit, seam alignment and material use. Fabrics and hides are inspected before cutting, and markers are planned to save material without compromising grain or pattern matching.
01
Inspection
Fabric checked for flaws, shade and width; hides graded for thickness and marks.
02
Marker planning
Pieces nested to use material efficiently, with grain, stripes and prints aligned.
03
Cutting
Hand cutting for samples and leather; cutting in lays for bulk textile orders.
04
Bundling
Panels bundled and ticketed by size and shade, so each garment is sewn from matching parts.
Branding & decoration
The right branding and decoration method for every fabric.
We match a method to each style, so we weigh the fabric, the artwork, the wash and wear the garment will meet, and the order size. Then we prove every technique below on your sample before a single piece goes to bulk.
Screen printing
Solid-colour logos · larger runs
Crisp, hard-wearing prints in solid colours. The most cost-effective finish once quantities climb, and it stays put wash after wash.
Sublimation
All-over print · sportswear
Full-colour artwork dyed into the polyester rather than sat on top, so edge-to-edge prints never crack, peel or fade.
Digital & heat transfer
Fine detail · small runs
This method reproduces photographic detail, fine gradients, names and numbers cleanly, so it suits intricate artwork and shorter, mixed runs.
Flat embroidery
Uniforms · workwear · jackets
Threaded logos with a clean, corporate finish that shrugs off industrial laundering and daily wear.
3D puff embroidery
Caps · hoodies · streetwear
A foam underlay lifts the stitch into a bold, raised logo with real depth and presence under the light.
Appliqué
Large logos · varsity
Layered fabric shapes stitched down for large logos and varsity lettering, adding colour and texture you can feel.
Patches & badges
Woven · leather · PVC
We sew in or heat-apply woven, embroidered or leather patches. As a result, you can change the branding per range without retooling.
Embossing & debossing
Leather goods · premium trims
We press your mark into leather with a heated die. There is no ink and no thread, so the result is a subtle, tactile, permanent impression.
Reflective details
Workwear · outdoor · riding
Reflective tape, piping and prints that catch the headlights, adding night-time visibility to workwear and riding gear.
Before stitching, every logo is digitised with its stitch density tuned to the fabric, so it sews cleanly, sits comfortably against the body and holds its shape wash after wash.
Finishing & quality control
Finished, measured, then inspected.
Garments are trimmed, pressed and shaped before final inspection. Quality is checked during production as well as at the end, so issues are corrected before they repeat across the order.
- Thread trimming, pressing and shaping
- Inline checks on the sewing lines
- Measurements against the approved size chart and tolerances
- Final inspection to the AQL level you set
Labels & packaging
Retail-ready when it lands.
Labels and packing are part of your brand presentation and of how your warehouse receives the goods. Both are specified with the order and checked before cartons are sealed.
Packaging 01
Labels
Woven labels for durable branding; printed or heat-transfer labels for tagless comfort in activewear. Placed and worded to your brand guidelines.
Packaging 02
Hangtags & barcodes
Hangtags, barcode and SKU stickers and size labels, so stock scans and sorts correctly in store or warehouse.
Packaging 03
Packing
Individual polybags, folding to your instructions, size or ratio assortments, and cartons marked with your shipping marks.
Capacity & lead times
Samples in 7 to 10 days, bulk in about three weeks.
We deliver your first sample in 7 to 10 days, then complete bulk production in about three weeks once you approve the sample and place the order. Complexity, custom materials and heavy decoration shift these dates, so we confirm firm sampling and bulk timings for your order in the quotation, before you commit.
What sets the timeline
| Sampling | Design complexity, material availability and the number of revision rounds. |
|---|---|
| Bulk production | Order volume, product mix, decoration and the season’s booked capacity. |
| Materials | Stock fabrics move fastest; custom-dyed, printed or developed fabrics add time. |
| Decoration & testing | Printing, embroidery, special packaging and third-party lab tests each add a step. |
| Minimum order | From 50 pieces per style and design, with a free tech pack on every new development. |
Supply chain & export
One controlled route from mill to forwarder.
01
Material sourcing
We source fabrics, trims and components to your specification, or buy from your nominated suppliers. Either way, materials are checked before cutting.
02
Production tracking
Materials in house, cutting, stitching, finishing and inspection are tracked, and you receive updates with photos at agreed checkpoints.
03
Export documentation
Packing lists, carton details and shipping marks are prepared to your requirements and your forwarder’s.
04
Shipping coordination
Goods are packed for sea or air freight and handed to your forwarder, or shipped to your instructions, worldwide.
FAQs
Questions about our capabilities
What does your production system cover?
Development, sampling, material sourcing, cutting, decoration, stitching, finishing, quality control, packing and export documents. Every order runs through the same steps, with a sign-off at each one.
How many samples will I need?
Usually a proto or fit sample and then a pre-production sample. Each round is agreed before it starts, and bulk production only begins once you approve the pre-production sample.
Which printing and embroidery methods do you offer?
Screen printing, sublimation, digital and heat-transfer printing, flat and 3D puff embroidery, appliqué, patches and leather embossing. We recommend a method for your fabric, artwork and order size.
Can you produce several ranges in one order?
Yes. Styles from different ranges can be developed, produced and shipped together, under one order and one quality plan.
What are your lead times?
We deliver your first sample in 7 to 10 days, then complete bulk production in about three weeks once you approve the sample and place the order. Complex styles, custom materials and heavy decoration add time, so we confirm firm dates per order in your quotation.
Talk to us
Still have a question?
Send your question with any references, quantities or dates. We usually reply within one business day.