Home / Manufacturing / Quality control system
Quality control system
Quality is checked from the specification to the sealed carton, not only at the end. Here is what we check, when we check it, and what you receive as a record.
Before, during, after
Three control stages on every order.
Most garment faults are cheapest to fix before cutting starts. Checks are spread across the order, so issues are found early instead of in the carton.
01
Before production
Tech pack, artwork, fabric, trims, size chart and the approved sample reviewed before cutting.
02
During production
Inline checks on stitching, measurements and workmanship while garments are on the line.
03
Before shipment
Final inspection, packing review and shipment paperwork before the order leaves.
What quality control means
Every garment checked against what you approved.
Apparel quality control compares materials, construction, measurements, branding and packing with the approved sample and specification.
It only works when that standard is clear before production. That is why every order starts with a signed-off sample, a size chart, and written branding and packing instructions.
What it prevents
- Measurements outside tolerance, and fit complaints
- Shade differences between panels or batches
- Open seams, skipped stitches and weak stress points
- Logos in the wrong place or colour
- Wrong labels, hangtags or packing
- Delays from rework found at the last minute
QC process
Eight checkpoints from spec to carton.
Each checkpoint has an owner and an output. Nothing moves to the next stage until it passes.
01
Specification review
Tech pack, artwork, fabric, trims, measurements, labels and packing instructions checked for gaps before sampling or bulk.
Output a confirmed specification
02
Material inspection
Fabric, leather, zips, buttons, drawcords and labels checked against the approved standard for type, shade, weight and defects.
Output approved materials, cleared for cutting
03
Pre-production check
The approved sample, size chart, stitching method and branding positions confirmed with the line before bulk cutting starts.
Output a line briefed on the approved sample
04
Inline inspection
Stitching, seam strength, measurements and workmanship checked on the sewing lines while garments are in progress.
Output issues fixed at the source
05
Branding inspection
Prints, embroidery, sublimation, labels and hangtags checked for placement, colour and consistency.
Output branding matched to the sample
06
Measurement check
Finished garments measured against the approved size chart and agreed tolerances.
Output measurements recorded by size
07
Final inspection
Finished goods inspected against the order, the approved sample and the AQL level you set.
Output an inspection report
08
Packing review
Folding, polybags, barcodes, carton marks and quantities verified before cartons are sealed.
Output a packing list and carton marks
Inspection areas
What we check, area by area.
Quality control covers more than a final look-over. These areas are checked on every order; the links explain each in more detail.
01
Specification
Style details, construction notes, measurements, trims, artwork and packing instructions.
02
Fabrics & materials
Type, shade, weight, hand feel and stretch, plus the trims and components that go with them.
04
Measurements
Finished garments checked against the size chart and agreed tolerances.
05
Stitching & workmanship
Seams, skipped stitches, loose threads, puckering, tension, bartacks and hems.
06
Printing & embroidery
Logo placement, print quality, colour, and embroidery neatness and accuracy.
07
Labels & branding
Woven, care and size labels, hangtags and stickers checked for content and placement.
08
Packaging
Folding, polybags, size stickers, barcodes, carton packing and shipping marks.
09
Final inspection
Visible defects, measurements, finishing, packing and quantities before dispatch.
AQL inspection
Defects classed by how much they matter.
Final inspection uses AQL sampling: a set number of garments is drawn from each lot and every defect found is classed by severity. Many buyers specify AQL 2.5 for major and 4.0 for minor defects, with zero tolerance for critical ones. We inspect to the levels you set, and your own or third-party inspectors are welcome.
Defect class 01
Critical
Anything that makes a garment unsafe or unsellable, such as sharp objects left in the garment, unsafe trims or a failed restricted-substance requirement. Zero tolerance.
Defect class 02
Major
Faults a customer would notice or return: measurements out of tolerance, open seams, stains, shade mismatch or incorrect branding.
Defect class 03
Minor
Small presentation issues that don’t affect use, such as a loose thread, slight puckering or a packing mark.
Records
Quality you can check for yourself.
Every order leaves with paperwork that shows what was checked and what was found, so you can approve shipment with confidence.
Your QC record
What you receive
- Approved sample and measurement sheet on file
- Progress updates with photos during production
- Final inspection report before dispatch
- Packing list by carton, style, colour and size
- Access for your own or third-party inspectors
Related pages
Quality starts before production.
Quality control works best when development, sampling and materials are clear from the start.
FAQs
Questions about quality control
What is apparel quality control?
Checking materials, construction, measurements, branding and packing against the approved sample and specification, at several stages of production rather than only at the end.
Do you inspect garments during production?
Yes. Inline checks run on the sewing lines, so stitching, measurement and workmanship issues are fixed before they repeat across the order.
What is AQL inspection?
A sampling method for final inspection. A set number of garments is checked from each lot, defects are classed as critical, major or minor, and the lot passes or fails against agreed limits. We inspect to the AQL levels you specify.
Can I add my own quality requirements?
Yes. Send your QC manual, tolerance chart, testing or packing requirements with your enquiry. We add them to the specification and check against them.
Can I arrange a third-party inspection?
Yes. Your own team or an inspection company is welcome during production or before shipment. Contact us to schedule it.
Talk to us
Still have a question?
Send your question with any references, quantities or dates. We usually reply within one business day.